SummitSeal - Imprinted Concrete Sealer - MATT - Highly Durable - Trade Grade

BENEFITS AND KEY FEATURES

• Provides a high-performance seal coating
• Highly durable solvent-based acrylic imprinted concrete sealer
• Provides a durable MATT finish
• Resists oil and stain penetration
• Can be used in domestic, industrial and commercial environments
• 100% UV fade resistant
• Prevents moss, algae and lichen formation
• Inhibits weed and algae growth
• The main sealer type used by the trade professionals

PRODUCT DESCRIPTION

SummitSeal Imprinted Concrete Sealer is a solvent-borne, premium resin-based sealer with exceptional effectiveness. that will provide a heavy-duty, long-lasting clear seal coating with a matt look finish.

Its penetration comes about by solvent evaporation, penetrating into the imprinted concrete to form an elastomeric joint and protect the paver face from oil and water infiltration.

The sealer prevents moss and weed formation when applied correctly, any cracks should be filled for optimum results.

100% UV light fade resistant, resistant to tyre plucks and resists oil stains, colour loss of the blocks and water damage.

Suitable for - commercial, public or industrial premises with heavy to extremely heavy traffic, this product is also perfect for use on residential driveways for customers that want an extra hard-wearing product.

Maintains the performance life of the pavement. Yields significant whole-life cost savings and reduces interim maintenance.
 
USES AND SURFACE COMPATIBILITY
Suitable for use on concrete and imprinted concrete.
 
COMPATIBLE PRODUCTS

Driveway Cleaner - Everest Trade Ultimate Driveway Cleaner

Oil Stain Remover - Everest Trade Oil Stain Remover

Efflorescence Remover - Everest Trade Efflorescence and Salts remover
 
SPECIAL PROPERTIES
It is easily cleaned and will withstand regular washing. Also resistant to most oils.
 
SPREADING RATE

• First coat:                Approximately 4 square meters per litre.
• Second coat:           Approximately 6 square meters per litre.

This is a rough estimate and varies depending on the condition of the driveway and the amount applied with each coat.

 
DRYING TIME
Under normal conditions, it is touch dry in approximately 3-4 hours.
Do not drive on the surface for 24 hours after the last coat.
 
STORAGE PRECAUTIONS
Store away from heat and flames. Secure the lid between uses to prevent paint hardening. Store away from frost.
 
THINNERS
Thinners aren't required with this product, use xylene or proprietary brush clear for cleaning.
 
SURFACE PREPARATION
Ensure all surfaces to be sealed are clean, dry and free from oil and grease and there are a couple of days of good weather so there is no chance of rain during application.

PRODUCT TECHNICAL SPECIFICATIONS

Below are the technical specifications of this coating. If you require more information on this product, please email us at contact@everestpaints.com and one of our staff members will be more than happy to provide you with the information needed.

Components:	1 Part - Single Pack.
Base Type:	Xylene Acrylic Resin.
Finish:	Satin / Wetlook Finish Finish.
Theoretical Coverage:	Approximately 3 - 4 square meters per litre, per coat.
Number of Coats:	2 Coats Recommended..
Coating Thickness:	50 Microns..
Suitable Substrates:	Concrete, Imprinted Concrete, Concrete Block Paving, and Standard Block Paving..
Use Case (Interior / Exterior):	Internal and External..
Touch Dry Time:	2 - 4 Hours at 18°C
Overcoatable:	2 - 4 Hours at 18°C..
Fully Cured:	.
Pot Life:	.
Primer Required?:	No primer required..
Colour Variation Count:	Colour(s) Available.
Application Method:	Brush, Roller, H.V.L.P Sprayer, Airless Sprayer, and Pump Sprayer..
Cleaner / Thinner:	Xylene.
Shelf Life:	24 Months if kept sealed and away from frost.
Sizes Available:	Available in Variants.

DATA SHEETS AND PRODUCT FILES

Below are all the product data sheets and files we have on this coating. If you require more information on this product, please email us at contact@everestpaints.com and one of our staff members will do their best to provide you with the information needed.

Coverage Calculator

This is our coverage calculator. Enter the size (m²) of the area you are looking to cover, then enter the number of coats you plan to apply, and it will inform you of the estimated quantity you will need based on the product's average coverage rates. If you require more information on this product, please email us at contact@everestpaints.com and one of our staff members will be more than happy to provide you with the information needed.