Best Selling Products
Everest - Ultimate QD Concrete Floor Paint and Sealer

Touch Dry in 2-4 Hours

Indoor & Outdoor Use

Fade Resistant Coating

Resists Cracking & Peeling

Prevents Moss & Lichen

British manufacturing

Indoor & Outdoor Use

Walk on in 4 Hours

Simple 1-Pack System

Easy Application

Seals Porous Floors Before Coating

Topcoat Within 48 Hours
EverFlor - PolyFlor - Industrial
- Black (RAL 9005)
- Dark Grey (RAL 7016)
- Mid Grey (RAL 7001)
- Light Grey (RAL 7035)
- Signal White (RAL 9003)
EverFlor - Prime PU - Polyurethane Floor Primer for Concrete

Seals Porous Floors Before Coating

Topcoat Within 48 Hours

Simple 1-Pack System

Walk On After 8 Hours
Concrete, Screed, Brick & Plaster
Everest - PremFlex - Flexible Roof Tile Paint
- Black (RAL 9005)
- Anthracite Grey (RAL 7016)
- Charcoal (RAL 7015)
- Mid Grey (RAL 7042)
- Light Grey (RAL 7038)
Everest - Skip & Container Paint
- Light Grey (RAL 7035)
- Mid Grey (RAL 7004)
- Anthracite Grey (RAL 7016)
- Black (RAL 9005)
- Juniper Green (BS 12 B 29)
EverFlor - UniFlor - Floor Paint
- Black (RAL 9005)
- Dark Grey (RAL 7016)
- Mid Grey (RAL 7001)
- Light Grey (RAL 7035)
- Signal White (RAL 9003)
SummitSeal - Ultimate Block Paving Sealer - Polyurethane
Everest - Ultimate QD Concrete Floor Paint and Sealer - Anti-Slip

Touch Dry in 2-4 Hours

Indoor & Outdoor Use

Fade Resistant Coating

Resists Cracking & Peeling

Prevents Moss & Lichen

British manufacturing
- Black (RAL 9005)
- Dark Grey (RAL 7016)
- Mid Grey (RAL 7001)
- Light Grey (RAL 7035)
- Signal White (RAL 9003)
Everest - DEKCOAT - Ultimate Decking Paint
EverFlor - PolyFlor - Industrial - Anti-Slip
- Black (RAL 9005)
- Dark Grey (RAL 7016)
- Mid Grey (RAL 7001)
- Light Grey (RAL 7035)
- Signal White (RAL 9003)
Everest - Oxide Gloss - Anti-Corrosive Paint
- Light Grey (RAL 7035)
- Mid Grey (RAL 7004)
- Anthracite Grey (RAL 7016)
- Black (RAL 9005)
- Juniper Green (BS 12 B 29)
SummitSeal - TarmacCoat - Tarmac Sealer & Restorer
Everest - CourtCoat Tennis Court Paint - Anti-Slip
Everest - FENCOAT - Ultimate Fence Paint
Everest - DEKCOAT - Ultimate Decking Paint - Anti-Slip

Seals Porous Floors Before Coating

Solvent free, no shrinkage

Topcoat Within 48 Hours

Indoor & Outdoor Use

Walk On After 8 Hours

Apply Straight From The Tin
SummitSeal - Oil-X - Oil & Grease Stain Remover
Everest - Oil Based Gloss Paint
- Light Grey (RAL 7035)
- Mid Grey (RAL 7004)
- Anthracite Grey (RAL 7016)
- Black (RAL 9005)
- Juniper Green (BS 12 B 29)
Everest - Agricultural & Industrial Barn Paint
Everest - Ultimate Garage Door Paint
- Light Grey (RAL 7035)
- Mid Grey (RAL 7004)
- Anthracite Grey (RAL 7016)
- Black (RAL 9005)
- Juniper Green (BS 12 B 29)
Everest - CourtCoat LM - Tennis Court Line Marking Paint
- Black (RAL 9005)
- Dark Grey (RAL 7016)
- Mid Grey (RAL 7001)
- Light Grey (RAL 7035)
- Signal White (RAL 9003)
SummitSeal - TarmacCoat - Tarmac Sealer & Restorer - Anti-Slip
EverFlor - EnduraCoat - Original
- Black (RAL 9005)
- Dark Grey (RAL 7016)
- Mid Grey (RAL 7001)
- Light Grey (RAL 7035)
- Signal White (RAL 9003)

100% Solids Technology

220 Microns Per Coat

Internal Floors Only

Easy Application
Professional Acrylic Floor Paint for Concrete
System Overview
Acrylic floor paints are single-pack, film-forming coatings designed to provide durable, breathable protection to concrete and bituminous substrates. Formulated using high-quality resin systems, these coatings deliver consistent adhesion, UV stability and controlled flexibility across internal and external environments.
Unlike two-component epoxy systems, acrylic floor coatings cure through solvent or water evaporation and do not rely on chemical cross-linking. This makes them straightforward to apply while maintaining reliable performance for light to medium traffic conditions.
Breathability & Moisture Tolerance
One of the key technical advantages of acrylic systems is their vapour permeability. Concrete slabs without an effective damp proof membrane (DPM), or newly cured substrates retaining residual construction moisture, can generate vapour pressure beneath impermeable coatings.
Acrylic floor paints allow limited moisture vapour transmission, reducing the risk of blistering or delamination where minor moisture movement exists. While not a substitute for correct substrate preparation, this breathability makes acrylic systems suitable for older garage floors and domestic concrete where moisture conditions are not fully controlled.
UV Stability & External Use
Epoxy coatings can yellow and degrade under prolonged UV exposure. Acrylic resins, by contrast, offer inherent UV stability and colour retention.
This makes acrylic floor paints suitable for:
- External concrete walkways
- Driveways and parking bays
- Plant areas exposed to sunlight
- Tarmac refurbishment
Where long-term colour stability is required, acrylic technology provides a practical solution.
Compatibility with Asphalt & Tarmac
Concrete is not the only substrate requiring protection. Asphalt and tarmac surfaces remain slightly flexible and can soften under temperature fluctuation.
Rigid, high-build coatings may crack or fail prematurely when applied to bituminous substrates. Acrylic floor paints retain a degree of flexibility, allowing them to accommodate minor surface movement while maintaining film integrity.
Correct preparation remains essential, including cleaning, degreasing and ensuring the surface is structurally sound.
Traffic & Performance Expectations
Acrylic floor systems are best suited to:
- Domestic garages
- Storage areas
- Workshops with pedestrian traffic
- Light equipment environments
- External pedestrian routes
They are not intended for continuous forklift traffic, heavy pallet movement or aggressive chemical exposure. For such environments, a high-build epoxy or polyurethane system should be specified.
System Selection Guidance
For porous or highly absorbent concrete, priming with an appropriate acrylic primer is recommended to regulate substrate suction and optimise adhesion.
Where higher compressive strength, abrasion resistance or chemical durability is required, consider a two-pack epoxy floor coating system.
Correct system selection should always be based on:
- Substrate condition
- Traffic intensity
- Moisture profile
- Environmental exposure
FAQs
Expert Advice & Guides
A few of our most recent guides applicable to this product range.
- by Sam Marriott
- by Sam Marriott
- by Sam Marriott































